PDA

View Full Version : Разшифроване на код за клавиaтура..НОКИЯ



bebito0o
07-04-2010, 03:31
Здравейте хора, имам огромен проблем с моя телефон - Нокия -->

http://www.geekcellulars.com/wp-content/uploads/2009/01/nokia-3600-slide.jpg

преди много време имах код за клавиатурата и наскоро реших да го сменя ,но когато въвеждах новите цифри нещо натиснах и после цъкнах ок и то взе та прие нов код :-x :-x . След това когато пробвах да го въведа ..нъцки ..казва грешен код.. и практически сега телефона е неизползваем , защото без кода всичко е заключено.

ПОМОООЩ !!

пс: черешката е ,че телефона е купен от България ,а аз сега живея в Америка и тук по сервизите всички ми вдигат рамене и нищо не знаят ..

:-x :-x

Utopia
07-04-2010, 06:49
They are number combinations you can enter into a handset. They perform a
wide range of functions from displaying phone information to removing sim locks

We do not guarantee these codes to work on all models of phones. If you have any new codes please drop us a line and I will add them.

*#0000# Displays your phones software version:

1st Line : Software Version
2nd Line : Software Release Date
3rd Line : Compression Type

*#06# For checking the International Mobile Equipment Identity (IMEI Number)
*#2640# Displays security code in use
*#0000# Display Software ver. and compresion type
*#100# Shows the phones number
*#639# Programming - min/sid
*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#7760# Manufactures code
*#7780# Restore factory settings
*#92702689# Displays:

1. Serial Number
2. Date Made
3. Purchase Date
4. Date of last repair (0000 for no repairs)
5. Transfer User Data. To exit this mode you need to switch your phone off then on again

*#30# Lets you see the private number
*#94870345123456789# Deactivate the PWM-Mem (not recommend)
*#746025625# Displays the Sim Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible

**21*number# Turn on “All Calls” diverting to the phone number entered
**61*number# Turn on “No Reply” diverting to the phone number entered
**67*number# Turn on “On Busy” diverting to the phone number entered
*3001#12345# Programming / Field Test
*#21# Allows you to check the number that “All Calls” are diverted to
*#61# Allows you to check the number that “On No Reply” calls are diverted to
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#43# Allows you to check the “Call Waiting” status of your phone.
#3370# Enable Enhanced Full Rate Codec (EFR)
#4720# Disable Half Rate Codec (correct code)
*#1345# Shows credit value
*** to the P sign
**** to get the W sign
***** to get the + sign
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that “All Calls” are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting” status of your cell phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on “All Calls” diverting to the phone number entered
**61*number# Turn on “No Reply” diverting to the phone number entered
**67*number# Turn on “On Busy” diverting to the phone number entered
12345 This is the default security code
press and hold # Lets you switch between lines

Software version *#2820#
M aster reset *73738#
SP lock *#3210#
Cooprate lock *#8140#
SIM lock *#4960#
Net Lock *#7320#

E616 get the P sign

P sign will appear after the # is held pressed for 3 seconds

Temp unlock solution working on older firmwares please only try once.

To unloc

Utopia
07-04-2010, 06:57
кой код си ползвала

bebito0o
07-04-2010, 17:14
благодаря ти , но никой от кодовете не ми върши работа, тъй като всички кодове са за СИМ карта , а аз съм заключила КЛАВИАТУРАТА.. :(